These wires are:

• Trailer feed – supplies brake power to the connector of the trailer
• Battery power – supplies power to the controller itself
• Brake switch – transfers power from the pressed brake pedal
• Ground – connects the controller to a grounded (negative) source

Installation process

1. Installing a trailer brake controller is not difficult and won’t take much time. You’ll need the controller itself, 7-way installation kit (6-way ones are available too) and 4-pole trailer connector (in case you don’t have it already).
2. Find an appropriate place to mount a 7-way connector, usually it is mounted on the bottom of the rear bumper. Secure a mounting bracket into your bumper employing self-tapping screws and then secure the trailer connector into this bracket. Plug the connector’s 4-pole adapter into 4-pole trailer connector of your truck or SUV. Screw the white wire into the frame to ground a 7-way connector.
3. Make a cut in the duplex cable’s rubber sheath and separate two wires inside. Using a butt connector, attach the black wire to the black wire on your 7-way connector and do the same for the white wire and blue (brake) connector’s wire. Route the duplex wire under your vehicle up to the engine compartment avoiding hot and pinch-risky areas.
4. Select the suitable location for the mounting bracket inside your SUV or truck. The most common location is the right lower side of the dashboard, because it ensures easy access to the brake controller in extreme situations. Drill the needed holes and install the bracket into the dashboard using screws. Secure the brake controller into the bracket and connect the wires.
5. Separate the brake wire, which is now white, from the black 12V hot lead, route it via the vehicle’s firewall and connect to your brake controller. Connect the controller’s blue wire to the white duplex cable’s white wire using a butt connector. Mount circuit breakers in a safe location on the firewall or under the hood. Route a 12V hot lead to a 40-amp breaker through ring terminals and then to the battery’s positive post. Route the black wire that comes out of the controller to another breaker and then to the battery’s positive post. Route the controller’s white (ground) wire to the battery’s negative post. Use the excessive brake wire or 12V hot lead to complete the connection in case of need. Inside the vehicle, connect the red controller’s wire to the wire carrying the signal of an engaged brake pedal using a quick splice.
6. Zip tie any excess or loose wires under your vehicle outside and underneath the dashboard inside. Remember that the wires should not interfere with gas and brake pedals and have to be kept away from excessive heat areas.

To protect the dashboard, many car owners use a dash cover. Fortunately, today aftermarket manufacturers provide a vast range of dash covers to meet various tastes and needs of customers. Dashtex, DashMat, Dash Designs, and Coverking are the most recognized brands that design and manufacture a variety of dash covers of high quality and durability.

All dash covers available on the market ensure:

• Fading and cracking protection
• Reduced glare and dust
• Custom fitment, which ensures hassle-free installation

Available in a myriad of styles and designs, dash covers not only protect the dashboard, saving its sleek original look, but also boost the looks of any vehicle interior. With the help of one of these handsome-looking, stylish pieces, you can easily bring the look and feel of plush carpeting, suede, velour, or real carbon fiber to your vehicle’s interior.

Whether you are looking for a dash cover to protect your factory dashboard or cover up old cracks, the industry provides you with thousands of choices. In this article, we are going to tell you about the materials these accessories are available in.

Manufacturers mainly use 5 types of materials and they are:

• 1. Carpeting
• 2. Suede fabric
• 3. Velour fabric
• 4. Woven fabrics
• 5. Carbon fiber

CARPETING

Carpeted dash covers are available in solid colors, which makes them more conservative in nature. They come without patterns and contrasting highlights providing the interior with just the right amount of classics. Carpeted covers can be made of:

• non-shrinking needle punch carpet;
• heavy-weight polyester carpet (poly-carpet);
• a blend of high tech materials, which can be molded into the shape of the dashboard (these covers are known as molded).

SUEDE FABRIC

This material ensures easy cleaning and an everlasting finish, while giving the interior of a vehicle a luxurious look. There are several types of suede dash covers available:

• Made of soft, smooth imitation suede material;
• Manufactured from perforated suede-like material;
• Crafted from brushed suede-like material.

VELOUR FABRIC

Soft and plush velour dash covers offer the widest variety of printed patterns in addition to solid colors.

WOVEN FABRICS

Woven fabric dash covers deliver a perfect combination of durability, wear-resistance, and easy cleaning. Crafted to stay good-looking even under hard use, these covers are available in solid colors and with printed patterns.

CARBON FIBER

For those who want to make their interior really special and exclusive. To minimize fading of carbon fiber, every cover features a clear laminated top layer that blocks UV rays, while providing a smooth surface for easy cleaning.

In addition to a great number of materials, colors, and designs to choose from, aftermarket manufacturers also allow car owners to customize their dash cover with embroidered images and personalized lettering.

Dorman replacement side mirrors: Manual or Automatic?

This category is also often referred to as manual and power mirrors. The definition already makes it pretty clear – manual mirrors are adjusted by hand and are usually seen in the older car models. Most of the modern cars already have automatic, or power, wing mirrors. They are controlled by buttons, and can be readjusted from inside the car. Like all automatic devices they have a number of advantages in comparison to their manual counterparts. First of all, you can preset specific positions, and the car will ‘memorize’ them. Plus, such spares typically have a function of heating, which significantly facilitates driving in the cold temperatures and in the fog. Also, depending on the sunlight, the mirror can be dimmed, if necessary. Some of them are equipped with light signals – a great thing for driving in the dark; and, of course, they can be folded with a push of a button – a very handy option while parking in the big city conditions.

Side Mirror visibility: telescopic or towing?

Telescopic and towing mirrors are terms used to define the way your mirror can be adjusted. The latter ones are normally installed in trucks because they allow seeing far behind the vehicle and are perfect if you are driving with a cargo trailer. Telescopic mirrors also facilitate rear vision and have a function of readjusting its length (literary, they function like a telescope).

Dorman replacement side mirrors: choosing a glass type

Then, there is, of course, a particular type of glass to consider. There are three types of glass that are being used in the wing mirrors: plain, convex, and tinted. Plain is plain – meaning that it is a flat, normal glass with no extra features. Convex glass is different, and the objects seen through such mirror seem farther than they appear. In practice, this significantly facilitates driving. However, while driving with a mirror like that, you should always remember that the objective distance is different from what it seems to be. Finally, tinted glass is a glass with an additional hue. Normally, tinted glass can be greyish or bluish. Brown or yellow tint is also pretty widespread. And, of course, apart from being tinted, a glass can at the same time be either plain or convex.

Replacement mirror texture: painted or textured?

This refers to the outer surface of your side mirror. It can be either painted to fit the color of your car, or textured, which eliminates the possibility of painting. The first ones are smooth, while the latter are not. Plus, there are also combinations where one part is smooth and another is uneven. Even though textured mirrors look cool, smooth texture has one undeniable advantage – that is, ability to exactly fit the color of your auto.

What the Car all about?

• The most convertible car ever made
• Very smooth
• Great comfort
• three-speed manual transmission
• Aztec Brown paint

When is it going to be? The auction called Held in What Dreams Are Made of: A Century Movie Magic” would hold the car for sake near the crossed block November 25. The model would be Model 81C trunk back which is a phaeton and is one of the classic inventions ever made. The speedometers show that the car has been run so far for more than 42000 miles and is the best one to be purchased.

About the car

The car is more popular for the fact that it has got the star status. It has been seen in most of the popular movies which gave him quite a lot more popular. The auction price may go to $500,000. Owed by Warner Brothers, the car was in the film industry till 1970 and later it was sold in the year 1995 for $211,500.

It is one of the best auctions that would be held so far for the fact that has come up with this gorgeous car which will still gain a lot more attention and popularity. So let us hope that this auction makes it grand and the car gets sold at a good value.

There are many front line companies that have been able to grab a good share of the market for a long time. They have been providing the people with great designs every now and then. Though the companies are producing the vehicles on a large scale care has been taken to ensure that the expectations of the customers are met. There is no compromise with the efficiency of the cars. Subaru has made its own mark in the automobile industry by manufacturing a large number of vehicles. It has achieved a new feat by producing its four-millionth vehicle.

Some moments of this great achievement

The four-millionth car by Subaru was produced at its manufacturing factory that is located at Lafayette in Indiana.
The Deep Indigo Blue 2014 along with the first Subaru that is going to leave the plant of Indiana has the ability to mesmerize each and every car enthusiast.
The Subaru plant in discussion was first opened in way back 1989. These days it produces many well known models of the company such as the Legacy, Tribeca and Outback. Not only has this it also produced the Toyota Camry.
The plant was setup by Isuzu and Subaru as a joint venture.
The plant holds the record of producing nine models on the behalf of four manufacturers over the years.

It has been also reported that the plant is planning to produce another one million cars by 2017.